Pre-Owned Biolight BLT M8500 M69 M9000 ECG SpO₂ NIBP Parameter Board

Pre-owned multiparameter acquisition board for compatible Biolight BLT M8500, M69 and M9000 patient monitors. Depending on its configuration, the board supports ECG, respiration, SpO₂ and NIBP parameter processing and control.

Pre-Owned Biolight BLT M8500 M69 M9000 ECG SpO₂ NIBP Parameter Board
Brand
Biolight BLT
Compatible Model
M8500 M69 M9000
Product Type
Maintenance Part
Category
Machine maintenance parts
Note
Item Details
Note
Condition Pre-owned / removed from equipment
Note
Product Type Multiparameter acquisition board
Note
Alternative Names Parameter board, ECG/SpO₂/NIBP board, measurement board
Note
Compatible Brand Biolight / BLT
Note
Applicable Models M8500, M69, M9000
Note
Equipment Type Multiparameter patient monitor
Note
Supported Parameters ECG/RESP, SpO₂ and NIBP, depending on configuration
Note
Supply Configuration Parameter PCB only unless otherwise confirmed
Note
Installation For trained biomedical service personnel

Product Overview

PanSW supplies pre-owned ECG, SpO₂ and NIBP parameter boards removed from compatible Biolight patient monitors. The parameter board provides interfaces and signal-processing circuits for the monitor’s physiological measurement functions. Depending on the board version, it may process ECG and respiration signals, communicate with the SpO₂ sensor circuit, and control or interface with the NIBP pneumatic system. The M8500, M69 and M9000 may use different board revisions and parameter configurations. Compatibility must be determined from the original PCB number, software version, connectors and installed measurement technologies.

Application and Ordering Notes

ECG and Respiration

Interfaces with the ECG input circuitry

Supports ECG waveform and heart-rate signal processing

May support impedance-respiration measurement

SpO₂

Interfaces with the monitor’s pulse-oximetry circuitry

Supports communication with the applicable SpO₂ sensor system

SpO₂ technology and connector type must match the original configuration

NIBP

Interfaces with the NIBP pressure-measurement system

May control the air pump and pneumatic valves

NIBP pump, valves, tubing and cuff connector may be separate components

Important Supply Notice

This listing is for the parameter circuit board shown or another specifically confirmed board revision. It does not automatically include:

ECG or SpO₂ input sockets

NIBP pump and valves

Internal cables

Patient cables and sensors

Mainboard or power board

Complete patient monitor

Only the items expressly stated in the quotation are included.

Product Gallery

Pre-Owned Biolight BLT M8500 M69 M9000 ECG SpO₂ NIBP Parameter Board image 1
Pre-Owned Biolight BLT M8500 M69 M9000 ECG SpO₂ NIBP Parameter Board image 2

Quality and Compatibility Notice

Compatibility information is provided for reference. Please verify the exact connector, model, and clinical application before ordering.

Compatibility confirmation: For Pre-Owned Biolight BLT M8500 M69 M9000 ECG SpO₂ NIBP Parameter Board, please confirm connector shape, patient-end type, cable length, machine model, and OEM part number if available.