Compatible Li-ion or Ni-MH Battery for SpringMed ECG-903 Three-Channel ECG Machine – DL4119

Compatible rechargeable battery for the SpringMed ECG-903 three-channel ECG machine. Available as a 14.8V 2200mAh Li-ion battery, reference DL4119, or a 12V 2000mAh Ni-MH battery. Please confirm the original battery version before ordering.

Brand
SpringMed
Compatible Model
ECG-903
Product Type
Battery Pack
Category
Medical batteries
Note
Specification Li-ion version Ni-MH version
Note
Battery type Li-ion Ni-MH
Note
Nominal voltage 14.8V 12V
Note
Rated capacity 2200mAh 2000mAh
Note
Battery reference DL4119 Not provided
Note
Rechargeable Yes Yes
Note
Compatible equipment ECG-903 ECG-903

Product Overview

The ECG-903 three-channel electrocardiograph may use either a Li-ion battery or a Ni-MH battery, depending on the equipment version. These batteries have different chemistries, voltages and charging requirements. They should not be considered interchangeable simply because they are used with the same ECG model. PanSW recommends checking the original battery label, voltage, connector and dimensions before ordering.

Application and Ordering Notes

Two battery versions available

Rechargeable Li-ion or Ni-MH configuration

Li-ion version cross-references DL4119

Designed for selected ECG-903 machines

Pre-order compatibility checking available from PanSW

Important Compatibility Notice

The ECG-903 can use two substantially different batteries:

14.8V 2200mAh Li-ion battery

12V 2000mAh Ni-MH battery

These versions are not directly interchangeable. Ordering the wrong version may prevent the battery from charging or operating correctly. Please provide clear photos of the original battery label, connector and battery compartment before ordering.

Quality and Compatibility Notice

Compatibility information is provided for reference. Please verify the exact connector, model, and clinical application before ordering.

Compatibility confirmation: For Compatible Li-ion or Ni-MH Battery for SpringMed ECG-903 Three-Channel ECG Machine – DL4119, please confirm connector shape, patient-end type, cable length, machine model, and OEM part number if available.